You are here : UPS Products > Line Interactive UPS > 1.2KVA / 720W ST1200

Line interactive ups 1200VA

ST1200

With internal battery

  • Overview
  • Specifications
  • Downloads
Features
•Excellent microprocessor control optimizes reliability
•Built in super smart charger, shorten charging time
•Boost and buck AVR for voltage stabilization
•Auto restart while AC is recovering
•Off mode charging function
•Simulated sine wave
•Cold start function
•Optional USB/RS-232 communication port and RJ-11 phone protection
•Offering LED and LCD panels for selection


Specifications


Model ST1200
Capacity 1200VA/720W
Input Voltage 110/ 115/120Vac or 220/230/240Vac
Input Voltage Range 81-145VAC/140-300VAC
Frequency Range 50 Hz/60Hz(Auto sensing)
Output Voltage 110/ 115/120Vac or 220/230/240Vac
AC Voltage Regulation ±10% (Bat Mode)
Frequency Range 50Hz ± 1Hz (Bat Mode)
Transfer time Typical 2-6ms
Waveform  Simulated Sine Wave (Bat Mode)
Battery Internal maintenance-free lead-acid battery
Battery Type & Number 12V/7Ah*2
Net Weight (kg) 9.5
Dimension,D*W*H(mm) 350*146*160
Typical Recharge Time 4-6 hours recover to 90% capacity
Full protection

Overload, discharge, overcharge, short circuit, over-voltage, under-voltage

and over-heating protection

LED display AC/Battery Mode,Load/Battery Level,Input/Output Voltage,Overload,Fault,and low Battery
Green lighting (AC Mode)
Yellow lighting (Battery Mode)
Red lighting (Fault)
Battery mode Sounding every 10 seconds
Low battery Sounding every second
Overload Sounding every 0.5 seconds
Battery Replacement Alarm Sounding every 2 seconds
Fault Continuously sounding
Humidity 0-90% Relative Humidity 0-40 (Non-condensing)
Noise Level Less than 40dB
Optional USB/RS232 Port Supports Windows 2000/2003/XP/Vista/2008,Windows 7/8 Linux Unix  and MAC


Specifications Downloads


ST Series UPS Specifications from Fenice Power

About| Solutions| News| Employment| Contact
© 2016 Fenice Power Co., Ltd All rights reserved.