You are here : UPS Products > Standby UPS > BK600

Standby ups

BK600

Uninterruptible Power Supply

  • Overview
  • Specifications
  • Downloads

Features


•Excellent microprocessor control optimizes reliability

•Auto restart while AC is recovering

•Off mode charging function

•Without AVR function

•Simulated sine wave

•Cold start function

•Compact size


Specifications


Model BK600
Capacity 600VA/360W
Input Voltage 110/ 115/120Vac or 220/230/240Vac
Input Voltage Range 81-145VAC/140-300VAC
Input Frequency Range 50 Hz/60Hz(Auto sensing)
Output Voltage 110/ 115/120Vac or 220/230/240Vac
AC Voltage Regulation ±10%  (Bat Mode)
Frequency Range  50Hz/60Hz ± 1Hz (Bat Mode)
Active Power 360w
Transfer time Typical 2--6ms
Waveform (Bat Mode) Simulated Sine wave
Battery Internal maintenance-free lead-acid battery 
Battery Type & Number 12V/7Ah*1
Floating Charging Voltage 13.7VDC
Charging ability 4-6 hours recover to 90% capacity
Output Receptacles Universal sockets x 2 or other standard sockets x 2/3/4 or customized
Full protection Overload, discharge,over charge, short circuit, over / under voltage protection
Line mode Green lighting
Battery mode Yellow flashing
Fault Red lighting
Battery mode Sounding every 10 seconds
Low battery Sounding every second
Overload Sounding every 0.5 seconds
Battery Replacement Alarm Sounding every 2 seconds
Fault Continuously sounding
Dimension,D*W*H(mm) 279*101*142
Net Weight (kg) 4.2
Humidity 0-90% Relative Humidity 0-40 (Non-condensing)
Noisy Level Less than 40dB
Warranty 1 Year
Can be customized Logo, Inner Box, Label

About| Solutions| News| Employment| Contact
© 2016 Fenice Power Co., Ltd All rights reserved.