1. Send receive card parameters
(1) Open xmplayer → control → LED control setting → parameter setting → 888888 / dbstarred → refresh → check "search synchronization LED control device" → OK → import file → select RSPS file → send screen selection parameters → send and receive card queue parameters → confirm; Note: try not to click "send all parameters";
(2) If you are prompted that the hardware cannot be found, please connect the USB cable;
(3) If the sending card is still not found, please check "sending card not found / control system".
2. Check DVI cable
(1) Re plug the DVI cable and restart the computer;
(2) Replace the DVI cable and restart the computer.
1. Send receive card parameters
(1) Open xmplayer → control → LED control setting → parameter setting → 888888 / dbstarred → refresh → check "search synchronization LED control device" → OK → import file → select RSPS file → send screen selection parameters → send and receive card queue parameters → confirm; Note: try not to click "send all parameters";
(2) If you are prompted that the hardware cannot be found, please connect the USB cable;
(3) If the sending card is still not found, please check "sending card not found / control system".
2. Check DVI cable
(1) Re plug the DVI cable and restart the computer;
(2) Replace the DVI cable and restart the computer.
1. Send receive card parameters
(1) Open xmplayer → control → LED control setting → parameter setting → 888888 / dbstarred → refresh → check "search synchronization LED control device" → OK → import file → select RSPS file → send screen selection parameters → send and receive card queue parameters → confirm; Note: try not to click "send all parameters";
(2) If you are prompted that the hardware cannot be found, please connect the USB cable;
(3) If the sending card is still not found, please check "sending card not found / control system".
2. Check DVI cable
(1) Re plug the DVI cable and restart the computer;
(2) Replace the DVI cable and restart the computer.
1. Send receive card parameters
(1) Open xmplayer → control → LED control setting → parameter setting → 888888 / dbstarred → refresh → check "search synchronization LED control device" → OK → import file → select RSPS file → send screen selection parameters → send and receive card queue parameters → confirm; Note: try not to click "send all parameters";
(2) If you are prompted that the hardware cannot be found, please connect the USB cable;
(3) If the sending card is still not found, please check "sending card not found / control system".
2. Check DVI cable
(1) Re plug the DVI cable and restart the computer;
(2) Replace the DVI cable and restart the computer.
1. Send receive card parameters
(1) Open xmplayer → control → LED control setting → parameter setting → 888888 / dbstarred → refresh → check "search synchronization LED control device" → OK → import file → select RSPS file → send screen selection parameters → send and receive card queue parameters → confirm; Note: try not to click "send all parameters";
(2) If you are prompted that the hardware cannot be found, please connect the USB cable;
(3) If the sending card is still not found, please check "sending card not found / control system".
2. Check DVI cable
(1) Re plug the DVI cable and restart the computer;
(2) Replace the DVI cable and restart the computer.
1. Send receive card parameters
(1) Open xmplayer → control → LED control setting → parameter setting → 888888 / dbstarred → refresh → check "search synchronization LED control device" → OK → import file → select RSPS file → send screen selection parameters → send and receive card queue parameters → confirm; Note: try not to click "send all parameters";
(2) If you are prompted that the hardware cannot be found, please connect the USB cable;
(3) If the sending card is still not found, please check "sending card not found / control system".
2. Check DVI cable
(1) Re plug the DVI cable and restart the computer;
(2) Replace the DVI cable and restart the computer.
Tel: +86-755-2735 3236
Fax: +86-755-8830 5922
Email: Cindy@fenicepower.com
Add:Building 4, No. 14, Chuangye Road, Shilong community, Shiyan Street, Baoan District, Shenzhen City, China
Copyright © 2022 FENICE POWER BY design – All Rights Reserved